Diagnostics Options - Festo CPX-E-EP Manual

2 Function
2.4

Diagnostics options

The module supports various diagnostics options, depending on the configuration and parameterisation of the
system CPX-E.
Diagnostics option
LED display components
System-specific
Network-specific
Status bits
I/O diagnostic interface
Festo Software
EtherNet/IP
Modbus TCP
Tab. 2.6
12
Description
System status and errors are displayed
directly on the module via LED indicators.
Network status and errors are displayed
directly on the module via LED indicators.
Common diagnostic messages are
transmitted cyclically to the interface as
internal inputs. Access is via the control
software, independently of the interface
and master.
Network-independent diagnostic interface
with read access to the internal data of
the system CPX-E at the I/O level.
Malfunctions or errors are displayed
directly on a PC, meaning that diagnostics
is also possible from a higher automation
level.
Diagnostics as part of the EtherNet/IP
function via the network.
Detailed module- and channel-related
error detection by means of control
software.
Diagnostics as part of the Modbus TCP
function via the network.
Detailed module- and channel-related
error detection by means of control
software.
Detailed information
è Instructions for use of system CPX-E
è Description of system CPX-E
è 2.4.1
è Instructions for use of CPX-E-EP
è 2.4.2
è Description of system CPX-E
è 2.4.3
è Description of system CPX-E
è Online help for software
è 2.5
è 2.6
Festo – CPX-E-EP-EN – 2017-07 – English