Festo CPX-E-EP Manual page 20

3 Parameterisation
TCP/IP Interface Object
– Object class: 245
d
– Instances: 1
Configuration of TCP/IP network interface.
Attribute no. Access
1 Get
2 Get (NV)
3 Set (NV)
4 Get (NV)
5 Set (NV)
6 Set (NV)
8 Set (NV)
9 Get (NV)
10 Set (NV)
11 Set (NV)
12 Set (NV)
13 Set (NV)
Tab. 3.5
20
Description
Interface status
Configuration capability
Bit 0 BOOTP client (false)
Bit 1 DNS client (true)
Bit 2 DHCP client (true)
Bit 3 DHCP-DNS update (false)
Bit 4 Configuration settable (true)
Bit 5 Hardware configurable (true)
Bit 6 Interface configuration – change requires reset
(false)
Bit 7 AcdCapable (true)
Configuration control
Physical link object
Path size; path
Interface configuration:
– IP address
– Netmask
– Gateway address
– Name server
– Name server 2
– Domain name
HostName (max. 64 chars)
TTL value – 1 ... 255 (default = 1)
Mcast config (IP multicast address configuration):
– Alloc control
– Reserved
– Num Mcast
– Mcast start addr
SelectAcd
0 = Enable ACD
1 = Disable ACD
LastConflictDetected:
– ACDactivity
– RemoteMAC
– ArpPDU
QuickConnect
0 = Disable
1 = Enable
Encapsulation inactivity timeout
0 = Disable
1 ... 3600 = Timeout in seconds (default = 120)
Type
DWORD
DWORD
DWORD
STRUCT of UINT +
Padded EPATH
STRUCT of
– UDINT
– UDINT
– UDINT
– UDINT
– UDINT
– STRING
STRING
USINT
STRUCT of
– USINT
– USINT
– UINT
– UDINT
BOOL
STRUCT of
– USINT
– ARRAY of
USINT [6]
– ARRAY of
USINT [28]
BOOL
UINT
Festo – CPX-E-EP-EN – 2017-07 – English