2. Diagnosis
2.1
Summary of diagnostics options
Diagnostic
Brief description
possibility
LED display
The LEDs show directly
configuration faults,
hardware faults, bus faults,
etc.
Diagnostics via
– Diagnostics via SDO
fieldbus
– Emergency message
Tab. 2/1:
Diagnostics options
1
DIL switch
settings:
Off = no
diagnostic
messages
(default)
On = Emergency
Message is sent
Fig. 2/1: DIL switches for diagnostic messages
Festo P.BE-CTEU-CO-OP+MAINT-EN en 1101NH
The following possibilities for diagnosis and error handling
are available, depending on the configuration of the bus
node:
Advantages
Fast "on-the-spot"
recognition of errors
Detailed fault recognition
Further information relating to the DIL switches on the bus
node can be found in Part I of the product documentation
entitled "Installation and Interface manual", which is supplied
with the bus node.
Detailed
description
Section 2.2
Section 2.3
1
2-3