Table of Contents
Advertisement
3. Install the LFF hot-plug drive in the chassis.
4. Determine the status of the drives using the drive LEDs located on the storage display LEDs.
To configure arrays, see the HPE Smart Storage Administrator User Guide on the Hewlett Packard
Enterprise website (http://www.hpe.com/info/smartstorage/docs).
Installing a flex slot power supply
WARNING: To reduce the risk of electric shock or damage to the equipment:
•
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
•
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
•
Unplug the power cord from the power supply to disconnect power to the equipment.
•
Do not route the power cord where it can be walked on or pinched by items placed against it.
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from
the server.
Procedure
Install the component as indicated.
Installing the chassis
31
Advertisement
Table of Contents
Troubleshooting
