Install the chassis into the rack
Prerequisites
•
Before you perform this procedure, review the rack warnings and cautions.
•
A fully populated chassis is heavy. Hewlett Packard Enterprise recommends removing the external chassis
components before installing the chassis into the rack.
1. If installed, remove the front bezel.
2. Remove the LFF hot-plug drives.
3. If installed, remove the RCM module.
4. Remove the power supplies.
5. If installed, remove the server blanks.
6. Remove the server nodes.
Procedure
1. Install the chassis into the rack.
2. Tighten the rack ear thumbscrews.
Operations
31