Trial Operation; Start-Up Schedule - Wexiodisk WD-6 Installation And User Manual

Installation instructions

3.7 Trial operation

Prepare the machine for trial operation with the help of OPERATING INSTRUC-
TIONS. The instructions describe the measures that must be taken to prepare the
machine for operation.

3.7.1 Start-up schedule

This should be completed when the machine is started up and used.
Read the installation and user manuals carefully. Then check the following points:
1. Check:
•
•
•
•
•
2. Filling the machine:
•
•
•
•
3. Start the machine:
•
•
•
4. Check the setting of the reference values:
•
•
Machine type:
Machine serial number:
Installation date:
Water and drain connections
That the machine is evenly balanced
Detergent and drying agent
That the filters and level pipe are in place
That the overheating protection device is reset
Turn on the mains switch and any circuit breakers
Close the hood
Fill the machine with water in accordance with the INSTRUCTIONS FOR
USE
Bleed the hood lifting cylinder (optional) as per the manual.
Check the pump's direction of rotation
N.B.! If the direction of rotation is wrong, the phase must be inverted on the
lockable main switch
Empty the machine and refill it
Check the final rinse flow during filling
N.B.: The machine will fill in two minutes and 15 seconds at the correct
flow. (machine with standard equipment). The flow is regulated by the built-
in ball valve.
All the reference values have been set to the recommended values on de-
livery
Check the temperatures
WD-6
28
Rev. 6.0 (201902)