Wexiodisk WD-6 Installation And User Manual page 40

Operating instructions
In table "0.0", the values for washing temperature and washing times are on rows
01 up to and including 04.
Table 0.0
Row number
01
02
03
04
To select service mode and change the washing temperature and washing time,
follow these instructions:
•
•
•
•
•
•
•
WD-6
Relates to
Washing temperature
Washing time programme P1
Washing time programme P2
Washing time programme P3
When moving to service mode, the washing programme must be finished.
Press the 0/1 button (9). Both the displays will now show two horizontal
dashes "--" and the machine will be in shut-off mode.
Hold the 0/1 button (9) down for approx. 3 seconds until the top display (2)
shows "0.0". When "0.0" appears on the display (2), the machine is in ser-
vice mode.
Press P1 (6). The top display (2) will now show 01, the first row number in
the table. The bottom display (4) shows the set washing temperature flash-
ing; only values that flash when they appear can be changed. If the tem-
perature is to be changed, press P2 (7) to increase the value or P3 (8) to
reduce the value.
If the washing time for a programme is to be changed, use P1 (6) to move
to the next row number in the table. For explanations of row numbers 01,
02, 03 and 04, see table "0.0" above.
When the settings have been changed, exit service mode by holding down
the 0/1 button (9) for approx. 3 seconds until the displays (2, 4) show two
horizontal dashes "--". The changed values are now saved.
Return to normal operating mode by then quickly pressing the 0/1 button
(9).
36
Rev. 6.0 (201902)
Range of settings
55 - 70° C
1.0 - 6.0 min.
1.0 - 6.0 min.
1.0 - 6.0 min.