Washing - Wexiodisk WD-6 Installation And User Manual

Operating instructions

4.2.4 Washing

Make sure that the items are in a position where they cannot move out of the
washing basket during the washing and rinsing phases.
•
•
•
•
•
•
•
•
•
P0 is a pause mode and is used in the case of prolonged intervals between wash-
es in order to maintain the tank temperature. The hood must be closed. The ma-
chine does not start in P0 mode.
•
•
•
For longer periods between washes, the machine should be in the "normal" mode
and closed. This ensures the temperature in the machine is maintained.
WD-6
Remove large pieces of food by rinsing the dishes with a hand shower. The
water in the hand shower must not exceed 40°C. Place the items to be
washed in the basket.
Open the hood.
Select the programme. Slide the basket into the machine. If the machine is
fitted with "autostart", the hood closes automatically and washing starts.
Close the hood. The machine starts washing using the selected pro-
gramme. The display (4) now shows the remaining washing time for the
programme.
The symbol (1) is lit during the washing phase.
Once the rinsing phase starts, the symbol (3) lights up. If the final rinse wa-
ter has not reached the correct rinse temperature once rinsing starts, the
symbol (3) flashes and the machine continues washing until the rinsing wa-
ter has reached the correct temperature.
Do not open the hood until the programme has finished.
If the hood is opened during the washing cycle, the machine will stop. If the
hood is closed again, the programme will start from the beginning.
When the machine has stopped, the selected programme appears on the
display (4) and the hood opens automatically if the machine has an auto-
matic hood. Remove the washed items and allow them to dry.
Press the programme button for the current programme once. "P0" ap-
pears on the display (4).
Press the button again to return to the current programme.
The hood must be opened and closed between each washing cycle.
39
Rev. 6.0 (201902)