Setting / Adjustment Of Flows; Adjustment Of Hinged Basket Conveyor - Wexiodisk WD-6 Installation And User Manual

Installation instructions

3.5.7 Setting / adjustment of flows

This is described in the service manual in the chapter ADJUSTMENT INSTRUC-
TIONS.

3.5.8 Adjustment of hinged basket conveyor

•
•
•
•
WD-6
Adjust the machine so that it is level by adjusting all four feet so that they
are in full contact with the floor. Use a spirit level.
Fill the machine.
Lift the basket conveyor (5) up and down and adjust leg 1 and leg 2 until
the basket conveyor is in the middle of both supports 3 and 4.
The legs must be adjusted in pairs if any further adjustment is required (to
the side, forwards or backwards).
20
47747
Rev. 6.0 (201902)