Daily Cleaning - Wexiodisk WD-6 Installation And User Manual

Operating instructions
Machines with a drain pump (option)
When the machine is switched off, the number of baskets washed is displayed for
around 5 seconds.
Two horizontal dashes "--" are then shown in the display for 3 minutes. At this
point the machine is still live and emptying and internal cleaning must take place
within this period. The machine then switches off automatically.
•
•
•
•
•
•

4.3.3 Daily cleaning

Internally
When the machine is switched off in accordance with the manual, rinse it internal-
ly.
Externally
Wipe the outside of the machine with a soft, damp cloth.
•
•
WD-6
Open the hood. Press button 0/1 (9). Take out the filters (12). Drain the
washing tank by removing the level pipe (13).
Press P1 (6). "dP" appears on the display (2) and the drain pump starts. It
stops automatically after a set period.
Once the machine has been emptied, close the hood. Press P3 (8). The
display (2) shows "SC" and the internal cleaning process starts. The other
display (4) shows the remaining cleaning time. After the cleaning process
has finished and the water has been emptied out, both the displays show
two horizontal dashes "--".
Open the hood. Check that the washing and rinsing nozzles (10, 18) are
clean and that no objects have fallen and lodged in the machine.
Remove and clean the pump filter (16), the chemical washing filters (12)
and the level pipe (13).
Store the cleaned parts in a washing basket. Make sure that the rubber
sleeve (14) on the level pipe does not become deformed, by allowing it to
hang free.
If detergent is used, it must not contain abrasives. Detergents containing
abrasives will damage the stainless steel panels.
The exterior of the machine must not be hosed. Water can enter the ma-
chine and damage the control panel and electrical equipment.
46
Rev. 6.0 (201902)