Installation Instructions; General Information; Requirements For The Installation Site; Lighting - Wexiodisk WD-6 Installation And User Manual

Installation instructions

3. Installation instructions
Read the chapters GENERAL INSTRUCTIONS and SAFETY INSTRUCTIONS
carefully before starting work.

3.1 General information

Read these instructions carefully, as they contain important information regarding
the correct installation method.
•
•
•
•

3.2 Requirements for the installation site

3.2.1 Lighting

In order to ensure the best possible working conditions during installation, opera-
tion, servicing and maintenance, make sure that the machine is installed in a well-
lit room.

3.2.2 Ventilation

The machine produces heat and steam when in operation. In order to ensure the
best possible working conditions, a certain air renewal rate is required in the dish-
washing room. The ventilation requirements for the dishwashing room are to be
dimensioned on the basis of the applicable standards.
WD-6
The instructions should be used together with the machine's wiring dia-
gram. These can be found in the machine's electrical cabinet.
The machine can be equipped with a number of different options. Certain
options may be standard in a number of countries. Check what your ma-
chine is equipped with.
If holes need to be drilled in the machine, the holes must be fitted with an
edge strip or similar protection.
Software version 4.7 or later should be used to connect a WD-PRM 6 to a
WD-6. If you are using an earlier software version this should be updated.
The level pipe in the dishwasher has been replaced with a bottom filter.
8
Rev. 6.0 (201902)