6 HANDLING
6 - 4
(3) Mounting method
(a) Put the GOT main unit into the panel opening, with its front face first.
(b) Mount the GOT in the following four locations at its top and bottom.
(Top)
Mounting position
(c) How to mount and fix the mounting fixture is given below.
POINT
Do not paint at the sections where the mounting fixture and control panel contact.
Instead provide a conductivity between the mounting fixture and control panel.
(Bottom)
Mounting position
1) Insert the mounting fixture into the fixture
fitting portion of the GOT main unit.
2) Tighten and fix the mounting screw in the
specified torque range.
MELSEC-GOT
6 - 4