Loading And Unloading Procedures - Mitsubishi Electric A960GOT User Manual

6 HANDLING

6.5.3 Loading and unloading procedures

6 - 23
Before loading/unloading a PC card while power is on, use the following procedure to
enable loading/unloading of the PC card.
(1) Mounting
OFF ON
PC card top face
(2) Dismounting
OFF ON
1) Set the memory card access switch of the GOT
to "OFF" and make sure that the memory card
LED goes off.
When the memory card LED goes off, the PC
card can be loaded/unloaded while power is on.
2) When loading the PC card into the GOT, insert
and load it into the memory card interface with
its top face up.
1) Set the memory card access switch of the GOT
to "OFF" and make sure that the memory card
LED goes off.
When the PC card LED goes off, the memory
card can be loaded/unloaded while power is on.
2) Remove the PC card after fully pushing the
memory card ejection button of the GOT to eject
the PC card.
Push
MELSEC-GOT
6 - 23