Mitsubishi Electric A960GOT User Manual page 4

[Mounting Precautions]
• When loading the communication board or communication module to the GOT main unit, fit it to
the connection interface of the GOT and tighten the mounting screws in the specified torque
range.
Undertightening can cause a drop, failure or malfunction.
Overtightening can cause a drop, failure or malfunction due to the damage of the screws or
module.
• When loading the memory board into the GOT main unit, load it into its corresponding GOT slot
and tighten the mounting screws in the specified torque range.
Undertightening can cause a malfunction due to a contact fault.
Overtightening can cause a malfunction due to the damage of the screws or module.
• When loading the PC card into the GOT main unit, insert and push it into its corresponding GOT
slot until the PC card eject button comes up.
Not doing so can cause a malfunction due to a contact fault.
• Before loading or unloading the PC card to or from the GOT, set the memory card access switch
to the OFF position.
Not doing so can cause the PC card data to be corrupted.
• When taking out the PC card, hold it with one hand and remove.
If removed without a hand support, the PC card may drop, resulting in breakage or damage.
[Wiring Precautions]
• Before starting wiring, always switch off the GOT power externally in all phases.
Not doing so may cause an electric shock, product damage or malfunction.
• Please make sure to ground FG terminal, LG terminal, and protective ground terminal of the
GOT power supply unit by applying Class D Grounding (Class 3 Grounding Method) or higher
which is used exclusively for the GOT.
Not doing so may cause an electric shock or malfunction.
• Correctly wire the power supply module on the GOT after confirming the rated voltage and
terminal arrangement of the product.
Not doing so can cause a fire or failure.
• Tighten the terminal screws of the GOT power supply section in the specified torque range.
Undertightening can cause a short circuit or malfunction.
Overtightening can cause a short circuit or malfunction due to the damage of the screws or
module.
• Exercise care to avoid foreign matter such as chips and wire offcuts entering the module.
Not doing so can cause a fire, failure or malfunction.
A - 3
CAUTION
!
DANGER
!
CAUTION
!
A - 3