Communication Module; Connection Module Types; Mounting Procedure - Mitsubishi Electric A960GOT User Manual

6 HANDLING

6.7 Communication Module

6.7.1 Connection module types

6.7.2 Mounting procedure

6 - 27
The communication module is used to make the GOT interface compatible with the
system to be connected to.
For the details of the connection form, refer to the [GOT-A900 Series User's Manual
(GT Works Version5/GT Designer Version5 compatible Connection System Manual)].
The following connection module types are available.
Type
A9GT-BUSSU For bus connection, small connector type (For A/QnA/Motion controller CPU)
A9GT-BUS2SU For multidrop bus connection, small connector type (For A/QnA/Motion controller CPU)
A7GT-J71AP23 For MELSECNET(II) optical link connection, for use as local station
A7GT-J71AR23 For MELSECNET(II) coaxial link connection, for use as local station
A7GT-J71AT23B For MELSECNET/B connection, for use as local station
A7GT-J71LP23 For MELSECNET/10 optical loop network connection, for use as ordinary station
A7GT-J71BR13 For MELSECNET/10 coaxial bus network connection, for use as ordinary station
A8GT-J61BT13 For CC-Link connection, for use as intelligent device station
A8GT-J61BT15 For CC-Link connection, for use as remote device station
A9GT-J71E71-T For Ethernet connection
Description
1) Fit the communication module securing fixtures
in the GOT main unit.
2) Mount the communication module on the GOT
interface.
3) Tighten and fix the mounting screws (3 pcs.) of
the communication module in the specified
torque range.
MELSEC-GOT
6 - 27