Mitsubishi Electric A960GOT User Manual page 58

6 HANDLING
CS(CTS)
RS(RTS)
RD(RXD)
SD(TXD)
DTR(ER)
DSR(DR)
Shell
6 - 11
• If D-sub 25-pin is used for the connector of the computer link unit.
(AJ71QC24(-R2), AJ71UC24)
GOT side
Signal Pin No.
8
7
CD 1
2
3
4
6
SG 5
- 9
Precautions for manufacturing cable
• Make a twisted pair for each signal and SG.
• Connect the braided shield to the connector shell (both ends).
• The cable used for the Mitsubishi EMC Directive compatibility test had
the following specifications.
Cable type
Conductor section area (mm
Connector and connector cover
• GOT connector
Use the connector matching the following model for the GOT.
9-pin D-sub (male) inch screw type
manufactured by DDK
17JE-23090-27 (D3CC)
• Connector of computer link unit
Refer to the user's manual of the computer link unit.
Braided shield
Item
2
)
MELSEC-GOT
Computer link module side
Pin No. Signal
8 CD
4 RS(RTS)
5 CS(CTS)
2 SD(TXD)
3 RD(RXD)
6 DSR(DR)
20 DTR(ER)
7 SG
9 -
Shell
Specification
Twisted pair shield cable
0.2
6 - 11