Idc Controls And Operation; Idc Controls - Eaton 9390 Installation And Operation Manual

Chapter 5

IDC Controls and Operation

This chapter describes the Integrated Distribution Cabinet (IDC) controls and instructions for operating the
UPS system.
5.1

IDC Controls

Figure 5-1 through Figure 5-6 identify and show the location of the controls on the Eaton 9390 40–80 kVA IDC.
Note:
The IDC can contain the following controls:
Maintenance Bypass Breaker (MBP) CB1 (standard)
l
Maintenance Isolation Breaker (MIS) CB2 (standard)
l
Bypass Input Breaker (BIB) CB3 (optional)
l
Rectifier Input Breaker (RIB) CB4 (optional)
l
Distribution panels PB1 and PB2 with panel input breakers (optional)
l
Distribution breakers CB11, CB12, CB13 – right side and CB21, CB22, CB23 – left side (optional)
l
Read the operation sections of this manual and of the Eaton 9390 UPS (40–80 kVA) Installation and
Operation Manual and have thorough knowledge of UPS operation before attempting to operate any
of the IDC controls.
Eaton 9390 IDC (40–80 kVA) Installation and Operation Manual 164201690 Rev 3 www.eaton.com/powerquality 5-1