Eaton 9390 Installation And Operation Manual page 17

Note: The IDC is shipped with a debris shield covering the ventilation grill on top of the unit. Do not remove
the debris shield until installation is complete.
4. Remove the protective covering from the cabinet.
5. Remove the packing material, and discard or recycle in a responsible manner.
6. Inspect the contents for any evidence of physical damage, and compare each item with the Bill of Lading.
If damage has occurred or shortages are evident, contact your Eaton service representative immediately
to determine the extent of the damage and its impact upon further installation.
Note: While waiting for installation, protect the unpacked cabinet from moisture, dust, and other harmful
contaminants. Failure to store and protect the IDC properly may void your warranty.
Eaton 9390 IDC (40–80 kVA) Installation and Operation Manual 164201690 Rev 3 www.eaton.com/powerquality
IDC Installation Plan and Unpacking
2-3