Introduction; Objective; Scope; Processor Mechanical Assembly - Intel Xeon Phi Processor x200 Thermal/Mechanical Specification And Design Manual


1

Introduction

1.1

Objective

This document provides processor thermal/mechanical specifications and design
guidelines for development of thermal and mechanical solutions for the Intel
Phi™ Processor x200 Product Family. This second generation Intel Xeon Phi product
family now offers a line of socketed processors in addition to a line of PCIe* card-based
coprocessors; but the coprocessor offerings are not discussed in this document.
Throughout this document, unless specified otherwise, the term "processor" represents
any member of the Intel Xeon Phi Processor x200 Product Family; where distinction is
necessary, the term "processor with fabric" will represent the Intel Xeon Phi™
processor with integrated Intel
1.2

Scope

Figure 1-1
Explicit hardware design and assembly details are provided in
Section 5
Figure 1-1.

Processor Mechanical Assembly

The components and information described in this document include:
• Processor package mechanical design specifications and integration guidelines.
• Processor socket mechanical design specifications and integration guidelines.
• Processor and heatsink mechanical retention assembly design specifications and
system design and integration guidelines.
— Back and bolster plate assembly design details, including loading targets.
® ®
Intel Xeon Phi™ Processor x200 Product Family TMSDG
8
®
provides a conceptual illustration of the processor mechanical assembly.
of this document.
Omni-Path Fabric (Intel
Heatsink
Assembly
Package
Carrier
TIM
(PCM45F)
Processor
Bolster Plate
Assembly
Socket-P1
Main Board
Back Plate
Assembly
Introduction
®
Xeon
®
OP Fabric).
Section 2 through
Processor
Heatsink
Loading
Module
(PHLM)
Order Number: 334785-002