Configuring The Modem Settings - Sharp IQ-8920 Operation Manual

This is the initial display whenever the Terminal mode is
selected. The display is blank now, but will show the
entries you make for dialing access, similar to the Index
mode in other applications.
Touch 1-1 at any time to quit the Terminal mode.
In the Terminal mode,
Configuring
the modem 1. p ress
settings
SETTING.
The MODEM SETTING window opens.
MNP
LINE TYPE
. . . . . . . . . . . .
SPEAKER
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WAKE UP
REDIAL
MNP
MNP (Microcorn Network Protocol) is an
error-correction protocol implemented on many modems
to help alleviate data errors caused by telephone line
noise, etc. Set this to ON if your modem supports MNP.)
LINE TYPE
Telephone lines use either pulse or tone dialing.
Pushbutton phones generally (but not always) use tone
dialing, and rotary phones use pulse dialing. (For more
information, see your modem manual.) Select your line
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . rrir
. . . . . . . . . .
255