Transfer Between 8900/9000 Series Units - Sharp IQ-8920 Operation Manual

Transfer
between
entries in an application can be transferred in the
Series units Schedule, To Do, Ann, Notebook, Outline, and
Scrapbook applications; and single entries or all the
entries in a file can be transferred in the Tel and User
different applications can also be transferred.
The transfer procedure differs according to whether single
entries, complete files, or folders are to be transferred.
244
Transferable
data and direc-
Transfer
tion of transfer
device
* Depending upon the SHARP or third party software you
are using, features and capabilities may vary.
The auto power off function (see p. 51) is disabled in all
l
transfer modes.
When transferring data from other models, only entries
l
in a mode (application) supported on the 8900/9000
Series unit can be sent. However, the Memo mode on
other models corresponds to the Notebook application
on the 8900/9000 Series unit, and the Business Card
mode on the 8000 Series to USER FILE 1 in the User
File application.
Data can be transferred directly between two 8900/9000
Series units via the infrared port. Single entries or all the
File applications. Using the Filer, a group of entries from
Peripherals
Most suitable task
required