Moving Between Fields; Inserting And Overwriting Text; Deleting Text - Sharp IQ-8920 Operation Manual

Moving
between
fields
Inserting and To insert text into existing text, move the cursor to the
overwriting
text

Deleting text

70
The following convenient key combinations are also
available in the Edit mode:
Moves the cursor to the beginning of the line.
Moves the cursor to the first line of a field (or
the last line of the previous field if the cursor
is already positioned on the first line of a
field).
Moves the cursor to the last line of a field (or
the first line of the next field if the cursor is
already positioned on the last line of a field).
In addition to the methods described above, you can
move the cursor directly to the next field in an entry by
touching the desired field name on the display, or by
pressing (NEXT) or (m) . In either case, the cursor
moves to the beginning of the desired field.
character you wish to insert text in front of and begin
typing. Insertion mode is the unit's default setting,
indicated by the triangle cursor 4. To switch to the
overwrite mode, press (INS] . Any text you enter will
replace existing text. The cursor appears as 1 in the
overwrite mode.
If you make a mistake while entering text, use the
following keys to delete the mistake, then enter the
correct text:
BS
Deletes the character behind the
cursor.
Deletes the character under the cursor.
Deletes the entire line the cursor is on.
Clears the currently selected field.
Except in the Notebook and Outline
applications.