Using A Cover Sheet - Sharp IQ-8920 Operation Manual

You may find that, in some cases, the fax number dials
too quickly for a connection to be made. You can slow
down the dialing sequence by inserting a comma (for
example, after an area code) in the fax number field of
the entry you want to send. Each comma inserts a
one-half second dialing pause. To do this, open the
application for the entry, and insert a comma at the
appropriate place(s) in the fax number field using the
usual entry procedures (see the Tel or User File sections
for more information).
Touch m at any time before faxing to return to
the Fax Directory.
Touch m or press (ON) to terminate fax
sending at any time.
When faxing Notebook entries, the following conditions
Margin settings on the received fax may not match
l
those in the Notebook entry.
A preset letter font is used for faxing.
l
You cannot select between pica and elite, or change
the font pitch.
If legal size paper is selected in the Notebook entry,
l
and the receiving fax machine has roll-type paper, a
legal-size page will be printed, if the receiving fax
machine uses separate single sheets, the legal size
page will be printed across two single pages.
Using a From the Notebook: Select an entry and touch
1.
Cover
sheet
From the Scrapbook: Select an entry, press [6%6) ,
touch -1, and select FAX SEND.
From the Filer: Select a folder and touch m .
2. Touch the USE A COVER SHEET box and then m.
The Cover Sheet Preview display appears.
235