Using Picture Fields - Sharp IQ-8920 Operation Manual

A warning message will appear asking if you are sure you
want to delete all entries in the selected file.
4. Touch (YESI (or [NO] to cancel the deletion).
You can also delete all entries in all three of the
application's files. Simply select ALL TEL FILES or ALL
USER FILES in step 3 above.
It is not possible to delete all entries either in a single file
or in all three files simultaneously if the unit is locked.
See p. 282.
Using Any drawing created in the Scrapbook can be copied
picture and then pasted into a picture field. Both the Tel and
fields User File applications can have picture fields. These
pictures can be, for example, hand drawn maps, notes, or
a signature.
Adding a picture to an entry
To add a picture to an entry, first be sure that the file you
are using has at least one field set up as a picture field.
While entering or editing an entry in the Edit mode:
1. Press
2. Press [m) or [NEXT) to display the desired drawing.
press (ZiCi%) .
3. Press (2nd) (m) to copy the drawing to the clipboard,
or press (2nd) (m) then touch ml if you will not
this saves memory since the drawing is not duplicated.
4. Press [w) to go back to the application.
5. Move to the picture field.
130
For information about defining field types, see p. 134.
USER FILE 1 and 2 come set up with a picture field
S
If you have not yet made a drawing, make one now and
need the drawing again in the Scrapbook application;
to open the application.