Sharp IQ-8920 Operation Manual page 249

4. On the sending unit,
Press II\JIENU) and touch PERIPHERALS .
l
Select UNIT TO UNIT TRANSFER.
l
A submenu opens.
Select SEND ALL IN THIS MODE, or SEND ALL IN
l
THIS FILE in the Tel and User File applications.
All entries in the application or in the selected file are
transferred.
In the Schedule, Tel and User File applications, if the
Filter function is turned on, only the filtered entries will be
transferred.
Transferring a Filer folder
1. Turn on both units.
2. On the sending unit, select the folder you want to send in
the Filer Drawer.
3. Press [m) on the receiving unit.
4. Press (%i%@) on the sending unit.
The transferred entries are stored in the appropriate
applications and are also automatically assigned to the IN
folder on the receiving unit.
After completing the transfer, you should move the data
l
from the IN folder on the receiving unit to another folder.
You can also transfer folders using UNIT TO UNIT
TRANSFER in the PERIPHERALS menu. In step 3, after
opening the Filer application, select GET DATA (ADD TO
INBOX) on the receiving unit. Then, in step
SEND SELECTED FOLDER.
Cable transfer
For more reliable data transfer, you can connect two
To set up the units with the cable,
1. Turn off both units.
select