Data Transfer - Sharp IQ-8920 Operation Manual

UPLOAD
STOP DOWNLOAD
SEND BREAK-CODE
MODEM SETTING
Configure a modem settings
(see p. 255)
Data transfer The unit can upload (send) entries from the Notebook
264
I
Press m to leave the on-line mode.
The [w) key functions as a Control key while the unit
l
is on-line. See p. 298 for the key combinations
required to produce ASCII codes.
To enter accented characters (e, 6, etc.) in on-line
l
mode, use [m]j .
If you try to do this with SHIFT IN/OUT set to ON and
DATA BIT to 7, the modem connection might be broken.
If this occurs, press @ to leave the on-line mode
and change SHIFT IN/OUT to OFF or DATA BIT to 8 in
the dialing entry you are using, then try again.
application in either ASCII (text) format or using the
XMODEM file transfer protocol. It can also send Filer
folders using XMODEM. And it can download (receive)
text and files using either ASCII or XMODEM. ASCII (the
American Standard Code for Information Interchange) is
an internationally recognized character set that makes it
possible to transfer text between different kinds of
computers, and for text typed on one computer to appear
in the same form on a remote computer. No error
Starts an upload.
Starts a download.
Select to stop a download in
process or when you have finished
downloading.
Sends a break code, which
interrupts a process. Also
necessary in some log-off
procedures.
Changes dialing settings while on
line. (Does not change setting in
individual entries.) Exactly the same
as the setting display except that it
L
does not have a NAME or
NUMBER field.
Opens a numeric keypad window
on the display. (This keypad
functions only in VT-1 00 terminal
emulation - see p. 270.)