Sharp IQ-8920 Operation Manual page 248

3. Press [G] on the receiving unit.
4. Press (%!@) on the sending unit.
The selected entry is transferred and appended to data in
the appropriate application.
You can also transfer single entries using UNIT TO UNIT
TRANSFER in the PERIPHERALS menu. In step 3, after
opening the same application as on the sending unit,
select GET DATA (APPEND) on the receiving unit. Then,
in step 4, select SEND SELECTED ENTRY on the
sending unit.
Transferring all entries in an application
With the exception of the Tel and User File applications,
all entries in all applications can be transferred. In the Tel
and User File, all entries in individual files can be
transferred.
1.
Turn on both unit.
2.
Open the same application on each.
If you are in the Tel or User File application, also select
the file.
On the receiving unit,
3.
Press (m) and touch PERIPHERALS .
l
Select UNIT TO UNIT TRANSFER.
l
A submenu opens.
, l .,.. \.\I. ..\,
IN THIS FILE
Select GET DATA (APPEND).
l
247