Setting The Clock - Sharp IQ-8920 Operation Manual

2. While holding down the @ key, push the RESET
button on the back of the unit using the included touch
pen or a similar object. The following message will appear.
Do
the organizer's
will delete all main
3. Touch IYES 1 to initialize
An initial display welcoming you to the unit appears.
If you want to take a tour and have a demonstration of
l
some of the features, touch 1-1. You can
press (ON] to leave the demonstration at any time and
go back to the initial display.
The welcome display is shown each time the unit is
l
turned on unless it is set to off (see p. 53).
To skip the tour, or after finishing it, proceed to setting
l
the clock, below.
Setting the In order for the Calendar, Schedule, To Do, and other
clock time-based applications to be accurate, the built-in clock
must be set to the correct city, time and date.
1. Touch -1 on the welcome display.
you want
really to initialize
data)?
unit.
the
49