Sending A Fax (Automatic Dialing) - Sharp IQ-8920 Operation Manual

Sending a
fax (Auto-
matic
dialing) ,
.
2.
3.
4.
232
the inside front cover of this manual). The unit will insert
this information automatically if it has been entered
correctly.
You can fax a single Notebook or Scrapbook entry or you
can fax an entire Filer folder. With the unit connected to
the CE-FM1 fax/modem, and the unit turned on.
From the Notebook:
From the Scrapbook: Select an entry, press [mj ,
touch -1, and select FAX SEND.
From the Filer: Select a folder and touch m .
From the Fax directory display, select a recipient and
then touch (CALL].
If you need to access a different directory, touch
l
CHANGE FAX DIRECTORY, which opens the SET UP
FAX DIRECTORY DISPLAY.
If you want to use a cover sheet, check USE A COVER
l
SHEET and see the section on Using a Cover sheet
later in this chapter.
Be sure to enter hyphens in the appropriate places in the
fax number.
Make any necessary adjustments to the number:
Touch (STARTI.
The unit will display the fax number in the confirmation
box (with any changes you may have made) and dial it.
Once connected, it will send the fax automaticallv.
Select an entry and touch