Making New Graphic Entries - Sharp IQ-8920 Operation Manual

After storing an entry, or pressing (K) or (N) to
changes to a "viewing page." Existing graphic entries are
viewed on this page.
Making 1. Press
new
A "blank page" appears on the display.
graphic
2. Start drawing anywhere in the drawing area with the
entries
touch pen.
3. Write the letter A and draw a circle around it.
4. Press (KiZ] .
78
* USE PEN
USE ERASER
USE AREA TOOLS [A] -
submenu for the menu
items.
recall a stored entry to the blank page, the display
(SCR PBOOK]
A
The drawing is now stored.
If you make a mistake while drawing, you can clear it any
time before it is stored by pressing [CANCEL) .
thin, thick, or "brush" drawing
a thin or thick eraser.
Selects a black, gray, or white line
eraser).
Sets drawn lines to straigl
or freestyle (ruler off).
Default drawing setting.
L-Converts the touch pen to an eraser.
Marks areas to cut, copy, paste or
delete.
Deletes a selected area, single entry,
or all Scrapbook entries.
to open the application.
it (ruler on)