Sharp IQ-8920 Operation Manual page 209

2. Drag the touch pen from the beginning to the end of the
text that you want to move or copy.
3. Press [2nd) (CUT) if you want to delete the selected text
so that it can be pasted to a new location.
text (and leave the original unchanged).
The text is copied in the clipboard.
4. Touch ISTORE] if you want to store the original entry
with any changes, or touch -1 to discard all the
changes you have made to the original entry, including
text cutting.
5. Move the cursor to the location where you want to place
the text, either within the same entry or in another entry.
6. Press (2nd) (??&%I.
7. Touch /STORE] to store the moved or copied text in its
208
Press (m) (copy! if you want to make a copy of the
The text you selected is now moved or copied to the new
location.
new location.
Pasted text is inserted into existing text regardless of
l
whether the insertion or overwriting mode is selected.
By highlighting the text before 12nd) JPASTE) is
pressed, however, it can be replaced with the pasted
text.
Only numbers and operators can be pasted to and from
l
the Calc application. Any text that is pasted will be
ignored. Pasted calculations can then be performed in
the Calc application.
A block of text can also be copied (but not cut) from an
l
entry opened in the View mode.