Sharp IQ-8920 Operation Manual page 251

Transferring data
Turn on both units.
1.
2.
On the 8900/9000 Series unit, open the application in
which you want to receive the data.
Only data corresponding to the application selected on
the receiving unit will be transferred (regardless of the
application selected on the sending unit).
destination file. To receive Business Card entries, make
sure that USER FILE 1 is selected.
3.
On the 9000 Series unit.
l
A submenu opens.
A message appears.
4.
5.
250
In the Tel and User File applications, select the
nd
Press (MENU) al
l
models, press [2ndl (m
Select iMp0RTX~ ER FORMAT.
Select VIA DIRECT CABLE.
l
the
Please set s e n d i n g
PC-LINK mode.
unit to
W h e n r e a d y , t o u c h [ I S E E ] . II
On the sending unit,
Press @ (or (m) on some models) (OPTION) to
l
open the Option menu.
Select PC LINK.
l
On the 8900/9000 Series unit, touch IJ to receive
all entries in the selected application on the other unit.
Repeat the steps above for all applications you want to
import to your Organizer.
Memo entries from units other than the 8900/9000
l
Series will be transferred to the Notebook, and
Business Card entries will be transferred to USER FILE
1 in the User File application. All other matching
applications will share the same name.
There are a few other restrictions. See p. 274.
l
touch IPERIPHERALS (or, on some