Editing Entries; Deleting Entries - Sharp IQ-8920 Operation Manual

4. Touch -1 when you find the desired entry.
Editing
entries
2. Select the entry in the Index mode or display it in the
3. Press [m] to open the Edit mode.
4. Make the desired changes.
5. Touch -1.
Deleting
entries
1. Select the entry in the Index mode or display it in the
2. Press (m), touch -1, and select DATA
3. Select SELECTED ENTRY.
4. Touch mi (or m] to cancel the deletion).
1. Press (m) , touch [m], in the Index or View
2. Select ALL ANN 1 or ALL ANN 2.
122
This function does not distinguish between upper- and
lower-case letters.
View mode.
The new, correct entry is now stored.
Deleting single entries
View mode.
DELETION.
A submenu opens.
A warning message will appear asking if you are sure you
want to delete the entry.
You can also delete single entries by pressing (DELJ in
step 2 above.
Deleting all entries
mode and select DATA DELETION.
A submenu appears.
A warning message will appear asking if you are sure you
want to delete all entries in the file.