Sharp IQ-8920 Operation Manual page 136

Move to "Number of fields" and press (al (E) to
4.
clear the current number in the field.
Enter the number of fields that you want your entries to
5.
have.
If you decrease the number of fields for a file that has
some entries stored, fields will be deleted from the bottom
of the file until the decreased number of fields is reached.
The information stored in those fields will also be deleted.
Touch (STORE1 to store the number of fields you entered.
6.
(Or 1-1 to cancel any changes and leave the
original number,)
7. Press (i%@ , touch -1, and select one of the
three CONFIGURE menus.
The CONFIGURE submenu appears.
8. Select FIELD NAME. The FIELD NAME window opens.
FIELD NAME ~1~~1
FIELD 2iTEXT
FIELD 3iTEXT
FIELD 41TEXT
FIELD 5iTEXT
FIELD GITEXT
FIELD 7;TEXT
9. Move to the desired fields and change them as required.
Use m (m) to clear the current name.
l
Enter the new name (up to 12 characters). Letters,
l
numbers, and symbols can all be entered.
. . . .
. . . . . . . c l
used in this file.
fields marked for
TEXT store text,
and fields marked
for PICTURE store
graphic images.
-Field name: enter
the name of the
field (up to 12
characters).
135