Customizing The Index Display - Sharp IQ-8920 Operation Manual

l
10. Touch -1 when you have finished.
(Or -1 to cancel the changes and leave the fields
as they were.)
l
l
The fax number field is used by the fax function for
Configuring
a fax number automatic dialing. While the User File has a fax number
field field built in, one must be set up for the Tel application.
To do so, follow the procedure above. In step 8, enter
when you are finished.
When entering fax numbers in the FAX NUMBER field,
be sure to include hyphens in the appropriate places. A
function to correctly dial locally or long distance, as
specified during faxing.
Customizing You can set up a different Index format for each of the
the Index three files in the Tel and User File applications,
display
1. Press (MENU), touch IMODIFY], and select one of the
three CONFIGURE menus.
2. Select INDEX FORM. The INDEX FORM window opens.
136
Touch TEXT-PICTURE to toggle between the two
data types.
If you change the data type setting of a field between
TEXT and PICTURE, all entries made in the field at the
previous setting will be deleted.
The data type for Field 1 is TEXT and cannot be
changed. You can specify PICTURE for any of the
remaining 15 fields. However, picture data requires
greater memory space than text data and the picture
data space for each entry is limited. You cannot paste
pictures to an entry exceeding this limit.
FAX NUMBER as one of your fields, and touch STORE
hyphen following the area code is necessary for the fax
designating up to three fields you want displayed in the
Index mode and the number of characters for each field.
In the Tel or User File application,