Setting Up The Fax Directory - Sharp IQ-8920 Operation Manual

Setting up
the Fax
Directory
1. Press [m) and touch [PERIPHERALS I.
2. Select GLOBAL SETTINGS, then SET FAX OPTIONS,
3. Set up the directory and touch 1 STORE 1 when finished.
230
Any file in the Tel or User File application can be
designated as the FAX directory. The designated file can
be used normally in its application, while the names and
fax numbers in the file's entries are listed in a directory
used by the fax function. The directory opens
automatically each time you want to send a fax, allowing
you to select the recipient from the names shown.
and finally SET UP FAX DIRECTORY.
USER1 USER2 USER3
NAME FIELD
. . . . . . .
OTHER FIELD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To use data on a RAM card in teh FAX directory, touch
l
to the card directory.
When faxing, you can dial manually without using the
FAX directory. See "Sending a fax" later in this chapter.
. .