Electrical System; Adf Controller Pcb - Canon DADF-N1 Service Manual

3.5 Electrical System

3.5.1 ADF Controller PCB

3.5.1.1
Removing the
Rear Cover
1) Open the feeder cover and the original
pickup tray; then, remove the screw [1].
F-3-269
2) Remove the 2 screws [2], and detach the
rear cover [3].
Be sure to detach the cover while
feeding the 3 claws [4] of the rear cover.
0007-2728
[1]
F-3-270
3.5.1.2
1) Disconnect all connectors of the ADF
controller PCB.
2) Remove the screw [1], and detach the
ADF controller PCB.
F-3-271
Removing the
ADF Controller PCB
Chapter 3
0007-2269
[1]
3-73