Removing The Original Placement Sensor; Pressurization Solenoid - Canon DADF-N1 Service Manual

Chapter 3
feeding the 3 claws [4] of the rear cover.
F-3-324
3.5.5.2 Removing the
Original Placement
Sensor
1) Remove the screw [1].
2) Remove the original placement sensor
[2] together with the bracket; then,
disconnect the connector [3].
F-3-325
3-88

3.5.6 Pressurization Solenoid

3.5.6.1
1) Open the feeder cover and the original
pickup tray; then, remove the screw [1].
F-3-326
0007-2290
2) Remove the 2 screws [2], and detach the
rear cover [3].
feeding the 3 claws [4] of the rear cover.
Removing the
Rear Cover
Be sure to detach the cover while
0007-2733
[1]