Canon DADF-N1 Service Manual page 125

[21]
[22]
F-3-197
Loosen the screw [26] of the tension
arm [25]; then, force the arm clockwise
to mount it. When you have attached the
timing belt [23], tighten the screw [26].
[25]
[26]
[23]
F-3-198
3.4.8.9 Removing the
Feeder Unit
1) Remove the screw [1], and pull out the
busing [2]; then, detach the original
pickup tray [3].
[24]
[23]
0007-2840
[3]
[1]
F-3-199
2) Remove the 2 screws [4] on the front
cover side; then, remove the locking
support [5],
connector [6].
F-3-200
3) Disconnect the sensor connector [7].
4) Remove the 2 screws [8], and detach the
Chapter 3
[2]
and disconnect
[4]
[5]
3-53
the
[6]