Canon DADF-N1 Service Manual page 131

F-3-221
4) Remove the 3 screws [9] and the 2 other
screws [10].
5) Remove the E-ring [11] and the bushing
[12]; then, detach the motor base [13].
[10]
[9]
F-3-222
6) Detach the motor drive timing belt [14]
[15].
[10]
[11] [12]
[14]
[15]
F-3-223
7) Remove the E-ring [16], retaining ring
[17], 3 gears [18], and then detach 3
timing belts [19] and the parallel pin
[20].
[18]
[16]
[17]
[18]
[
F-3-224
8) Remove the resin E-ring [21], pulley
[22], and belt [23]. Before removing the
pulley [24], you need to remove the
feeding unit.
Chapter 3
[20]
[19]
[18] [19]
3-59