Removing The; Removing The Feeder Cover; Removing The Pickup Motor - Canon DADF-N1 Service Manual

Chapter 3
F-3-145
3.4.7.2

Removing the

Front Cover
1) Open the feeder cover [1], and remove
the screw [2].
[2]
F-3-146
2) Remove the 2 screws [3], and detach the
front cover [4].
3-40
0007-2745
[1]
[3]
F-3-147
3.4.7.3 Removing the
Feeder Cover
1) Remove the screw [1] and the
positioning pin [2]; then, detach the
feeder cover [3].
[3]
[2]
[1]
F-3-148
3.4.7.4
Removing the
Pickup Motor
1) Disconnect the connector [1].
2) Remove the 2 fixing screws [2] of the
adjusting plate.
[4]
0007-2767
0007-2777