Canon DADF-N1 Service Manual page 121

[3]
[2]
[1]
F-3-181
3.4.8.4
Removing the
Pickup Motor
1) Disconnect the connector [1].
2) Remove the 2 fixing screws [2] of the
adjusting plate.
[1]
F-3-182
3) Remove the tension spring [3] using
tweezers; then, remove the stepped
screw [4], and detach the pickup motor
[5] together with the adjusting plate.
0007-2778
[2]
[2]
[3]
F-3-183
3.4.8.5 Removing the
Pickup Clutch
1) Remove 3 harness guide clips [1], and
then disconnect the connector [2].
[2]
F-3-184
2) Remove the resin E-ring [3] and bearing
[4], and then remove 2 screws [5].
Chapter 3
[4]
[5]
0007-3404
[1]
3-49