Removing The Reinforcing Plate; Removing The Feed Motor - Canon DADF-N1 Service Manual

[5]
[4]
[3]
F-3-125
3) Remove the clutch [6], gear [7], clutch
mount [8], bearing [9], and shaft [10].
[8]
[10] [9] [7]
F-3-126
3.4.6.6
Removing the
Reinforcing Plate
1) Remove 2 screws [1] to remove the
reinforcing plate [2].
[3]
[6]
0007-2786
[2]
F-3-127
3.4.6.7 Removing the
Feed Motor
1) Free the 5 claws [1] of the harness guide;
then, disconnect the connector [2].
[2]
F-3-128
2) Remove the tension spring [3].
Chapter 3
[1]
[1]
0007-2818
[1]
3-35