Canon DADF-N1 Service Manual page 98

Chapter 3
[1]
[3]
F-3-89
2) Remove the 4 screws [4] and the other
screw [5]; then, detach the left hinge
unit.
[4]
[5]
F-3-90
3) Remove the screw [6], and detach the
original placement sensor [7] together
with the bracket; then, disconnect the
connector [8].
3-26
[2]
F-3-91
4) Remove the 3 screws [9] and the 2 other
screws [10].
5) Remove the E-ring [11] and the bushing
[12]; then, detach the motor base [13].
[9]
F-3-92
6) Detach the motor drive timing belt [14]
[15].
[10]
[11] [12]
[10]
[