Chapter 3
F-3-233
When mounting the platen roller [11],
and the roll holder, be sure that the roll
shaft [13] is fitted in the cut-off [14] of
the base.
F-3-234
3-62
3.4.10
Delivery
Roller (lower)
3.4.10.1 Removing the
Lower
Reversing Roller
If you are replacing the roller segment of
the lower delivery reversing roller,
1) Open the original pickup tray, and push
up the roller segment [1] to detach.
F-3-235
If you must detach the whole of the
lower delivery reversing roller, go
through the following steps:
3.4.10.2 Removing the
Rear Cover
1) Open the feeder cover and the original
pickup tray; then, remove the screw [1].
Reversing
Delivery
0007-1677
[1]
0007-2727