Canon DADF-N1 Service Manual page 150

Chapter 3
[4]
[5]
F-3-287
3) Remove the screw [6], and detach the
original placement sensor [7] together
with the bracket; then, disconnect the
connector [8].
F-3-288
4) Remove the 3 screws [9] and the 2 other
screws [10].
5) Remove the E-ring [11] and the bushing
3-78
[12]; then, detach the motor base [13].
[10]
[9]
F-3-289
6) Detach the motor drive timing belt [14]
[15].
[14]
[15]
F-3-290
7) Remove the E-ring [16], retaining ring
[17], 3 gears [18], and then detach 3
timing belts [19] and the parallel pin
[20].
[10]
[11] [12]
[