Canon DADF-N1 Service Manual page 129

[5]
[4]
[3]
F-3-213
3) Remove the clutch [6], gear [7], clutch
mount [8], bearing [9], and shaft [10].
[8]
[10] [9] [7]
F-3-214
3.4.9.6
Removing the
Reinforcing Plate
1) Remove 2 screws [1] to remove the
reinforcing plate [2].
[3]
[6]
0007-2812
[2]
F-3-215
3.4.9.7 Removing the
Feed Motor
1) Free the 5 claws [1] of the harness guide;
then, disconnect the connector [2].
[2]
F-3-216
2) Remove the tension spring [3].
Chapter 3
[1]
[1]
0007-2823
[1]
3-57