Removing The Upper Delivery Reversing Roller - Canon DADF-N1 Service Manual

Chapter 3
[3]
[1]
F-3-97
2) Remove the 2 screws [4] on the front
cover side; then, remove the locking
support [5],
connector [6].
F-3-98
3) Disconnect the sensor connector [7].
4) Remove the 2 screws [8], and detach the
3-28
[2]
and disconnect
[4]
[5]
feeder unit [9].
[9]
F-3-99
3.4.5.10 Removing the
Upper
Reversing Roller
1) Turn over the feeder unit; then, remove
the resin E-ring [1], and pull out the
the
pulley [2] and the bushing [3].
[6]
[2]
[1]
F-3-100
2) Remove the resin E-ring [4], and detach
the bushing [5].
3) Remove the upper reversing delivery
roller [6] and the separation guide [7].
[8]
Delivery
0007-2845
[3]
[7]