Removing The Adf Controller Pcb - Canon DADF-N1 Service Manual

F-3-327
3.5.6.2
Removing the
ADF Controller PCB
1) Disconnect all connectors of the ADF
controller PCB.
2) Remove the screw [1], and detach the
ADF controller PCB.
F-3-328
0007-2844
[1]
3.5.6.3 Removing the
Locking Solenoid
1) Remove the 2 screws [1], self-tapping
screw [2], and the other screw [3]; then,
detach the locking solenoid [4].
[2]
[4]
F-3-329
When mounting the locking solenoid,
fit the plunger [5] to the arm [6] in
advance; then, fit the locking solenoid
[4] to the bracket.
[6]
[5]
[4]
F-3-330
Chapter 3
0007-2293
[3]
[1]
3-89