Detaching The Timing Belt And The Pulley - Canon DADF-N1 Service Manual

[5]
[4]
F-3-157
3.4.7.8 Detaching the
Timing Belt and the
Pulley
1) Disconnect the 2 connectors [1], and
remove the screw [2] and grounding
fixing screw [3]; then, slide the harness
guide slightly to the left, and lift it.
[1]
[3]
F-3-158
2) Remove the 4 screws [4] and the other
screw [5]; then, detach the left hinge
unit.
[7] [4]
0007-5780
[2]
[6]
[5]
F-3-159
3) Remove the screw [6], and detach the
original placement sensor [7] together
with the bracket; then, disconnect the
connector [8].
F-3-160
4) Remove the 3 screws [9] and the 2 other
screws [10].
5) Remove the E-ring [11] and the bushing
[4]
Chapter 3
3-43